|
Linear-motor-drive, high-speed die-sinker EDM
AG35L
|
Die-Sinker EDM which features high speed, high quality machining perfomance and high operability |
|
- "Zero-wear" (wear rate of less than 0.06% is defined as zero-wear)
While machining with graphite electrode, "Zero-Wear" has been made possible, making full advantage of high speed machining performance of graphite electrode.
Large reduction of machining time and human errors can be expected thanks to the reduced number of electrodes.
- Remodeled "LP control", "easy-to-use" pursuing control panel
Control panel pursuing easy-to-use and newly adopted high-speed serial comunication method has improved driving performance and servo responsiveness.
- Intelligent Q3Vic EDM is standard
3D solid model can be directly imported into the NC of the EDM.
Easy and accurate set up is possible thanks to the 3D solid image displayed on the screen without entering complicated programming and numeral input.
|
| Max. travel of X,Y,Z axes (mm) |
350 × 250 × 250 |
| Max. electrode weight (kg) |
50 |
| Max. weight of workpiece (kg) |
550 |
Machine tool dimensions
(width × depth × height) (mm) |
1515 × 2240 × 2395
(including service tank) |
| Total power supply |
3-phase 50/60 Hz 10 kVA
(including fluid cooler (optional)) |
| Air pressure (MPa) |
0.45 (0.65 with automatic clamp chuck) |
| Air flow rate (NR/min) |
100 |
|
Gear module0.5 number of teeth96 angle of twist20°
Making highly precise helical gear is possible by accurately controlling Z axis and rotation axis with high response servo technology.
|
| Workpiece material |
Fe |
| Cutting thickness |
10 mm |
| Electrode material |
Cu |
| Surface roughness |
2.6μmRz |
| Time |
17 hours 10 min. |
|
Hard metal -machining form 20mm
Application example of high grade and uniform surface finishing with "SVC circuit".
|
| Workpiece material |
Hard metal/G5 |
| Cutting thickness |
1 mm |
| Electrode material |
Cu Tungsten |
| Surface roughness |
0.72μmRz |
|
Gloss surface finishing by SVC-PIKA
Surface finishing almost as good as hand polishing is possible.
|
| Workpiece material |
S-STAR |
| Cutting thickness |
5 mm |
| Electrode material |
Cu |
| Surface roughness |
0.35μmRz |
| Time |
5 hours |
|
Gloss surface finishing by SVC-PIKA
Precise uniform gloss surface finishing is possible, polishing process is reduced.
|
| Workpiece material |
S-STAR |
| Cutting thickness |
1 mm |
| Electrode material |
Cu |
| Surface roughness |
1.0μmRz |
| Time |
1 hour 40 min. |
|
Machining form 33x33mm sharp edge
Sharp inner corner and bottom finishing is possible with only one electrode.
Electrode wear rate is boundless close to zero and accuracy of transcription is dramatically improved.
|
| Workpiece material |
NAK80 |
| Cutting thickness |
15.5mm |
| Electrode material |
Graphite/TTK9 |
| Surface roughness |
9.8μmRz |
| Time |
1 hour 30 min. |
| Remarks |
Number of Electrodes 1
Electrode wear rate 0.06% |
|
Machining form f 15mm multiplecutting
High quality surface machining is possible with graphite electrode while complicated form and simultaneous cutting.
|
| Workpiece material |
STAVAX |
| Cutting thickness |
4.5mm |
| Electrode material |
Graphite/TTK9 |
| Surface roughness |
1.4μmRz |
| Time |
5 hours 40 min. |
|
*Sales model may differ depending on the market.
Please contact your sales representative for details.
|
|
|
