|
Linear motor drive, high-speed wire cut EDM
AQ750L 
|
Further developed next generation CNC power supply unit "LP power supply" is standard.
High-speed, high-accurate, high-quality , energy saving have been realized.
|
|
- "LP power supply" is standard.
Thanks to ergonomically designed new control panel, beginners can operate easily.
Keyboard and remote controller designed from the viewpoint of workers feature improved operability.
"Intelligent Q3vic EDW"is standard and 3D solid model can be directly imported to CNC controller at the manufacturing site.
- Linear motor drive
Sodick-made linear motor drive features high-speed drive and positioning accuracy. No mechanical contact enables high respondence, long term stability and reliability. This linear motor realizes best performance by being combined with motion controller(K-SMC) that Sodick has cultivated for a long time.
- Super high-speed automatic wire threading system
A World class super high-speed automatic wire threading system "Super Jet AWT" is equipped with wire aneal function on top of exisiting pipe jet. Various threading mode is possible according to the necessities at working site.
"Close-clearance dies" is newly standard and machining accuracy has been improved in any wire EDMing.
- Maintenance free
High speed automatic threading system, wire bobbin 20kg and ejected wire cutting system are standard and automatic
operation can be done.
|
| Max. travel of X,Y,Z axes (mm) |
750 × 500 × 400 |
| Max. travel of U,V axes (mm) |
770 × 520 |
| Taper angle |
±30º (thickness: 150 mm) |
Max. machining size
(Width × Depth × Height) (mm) |
1050 × 750 × 400
(flush machining) |
| Max. weight of workpiece (kg) |
1500 (flush machining) |
Machine tool dimensions
(Width × Depth × Height) (mm) |
2100 × 2800 × 2350
(including power unit and service tank) |
|
Wide angle taper cutting on a thick workpiece by taper flex
Quality of high angle machining is highly improved by taper flex.
|
| Workpiece material |
NAK55 |
| Workpiece thickness |
200 mm |
| Maximum angle |
36.5º |
| Surface roughness |
3.85 μmRz |
| Time |
30 hours 12 min. |
| Wire diameter |
f 0.25 mm |
| Dielectric fluid |
Water |
|
Interlocking parts consisting of 3 pieaces
This is an example which can be done by high machining accuracy.
|
| Workpiece material |
SUS403 |
| Workpiece thickness |
280 mm |
| Surface roughness |
3.54 μm Rz |
| Time |
18 hours 12 min. |
| Wire diameter |
f 0.20 mm |
| Dielectric fluid |
Water |
|
*Sales model may differ depending on the market.
Please contact your sales representative for details.
|
|
|
